6mm / .243 Caliber Neck Sizer Die - 243 Winchester, 6mm Remington, 6mm Creedmoor, etc.

Product ID Number
- Part No. 046041

Weight & Dimension
- Length: 6.8750
- Height: 1.2500
- Width: 1.2500
- Weight: 0.4830LB(s)

Hornady® reloading dies represent the finest in machined craftsmanship. Precise machining allows accurate reloading by offering easier adjustments, better alignment and smooth functioning. With one of the finest internal finishes in the industry, Hornady® reloading dies provide a lifetime of reloading. They’re so well-crafted that they’re guaranteed never to break or wear out from normal use. The Hornady® Neck Size Die features a removable Elliptical Expander that is superior to “ball expanders”. This Hornady® exclusive provides extremely smooth neck sizing and significantly reduces friction and case neck stretch. Internal threading prevents it from pulling loose and the elliptical expander eliminates the need for a separate expander die for necking-up to the next caliber. The Elliptical Expander and headed decap pin are mated to a Zip Spindle™ that positively locks to eliminate slippage. A series of light threads cut on both the spindle and spindle lock allows incremental adjustments by turning the spindle or it can easily “zip” up or down for larger movements. The Hornady® Neck Size Die can be used to neck size a variety of cartridges that use the same bullet diameter. This die also features a hardened steel Headed Decap Pin. This die comes with a Hornady® Sure-Loc™ lock ring that clamps around the entire die body applying constant pressure to hold the ring in place. The locking screw tightens the ring without coming into contact with the threads, and the incorporated wrench flats allow easy removal or replacement of the die and eliminates possible damage from pliers.

HORNADY® NECK SIZE DIE COMES COMPLETE WITH THE FOLLOWING:

Neck Size Die and Sure-Loc™ Lock Ring • Removable Elliptical Expander • Decap Pin Retainer • Headed Decap Pins 7/8”-14 thread die that works with all presses that accept standard dies. Does not include a shell holder. Other accessories sold separately. Hornady®

Lock-N-Load®

Die Bushings are necessary for use with modern Hornady® reloading presses: Hornady Item number 044094 (2-Pack), 044093 (3-Pack), 044096 (10-Pack). Hornady® recommends spraying all metal parts with Hornady® One Shot® Gun Cleaner & Lube: Hornady Item number 99901 (10 oz aerosol) 9990 (5 oz aerosol). No-risk, Lifetime warranty. See Hornady.com for more information.

MADE IN THE USA