DESCRIPTION
Co-Ax Single Stage Reloading Press
by FORSTER RELOADING PRODUCTS
Product Overview:
The Forster Co-Ax Single Stage Reloading Press comes with several unique features that make it one of a kind. You can change between dies in seconds with the snap-in and snap-out die changing feature. The Co-Ax has a positive spent primer catcher system which passes all spent primers and dirty carbon through a tube and into a container. This helps keep all working parts free of dirt and abrasives. Because there is absolutely no torque on the head of the Co-Ax Single Stage Press, long life is the rule rather than the exception. Due to the design of the linkage and pivots, all forces are in equilibrium whether the Forster Co-Ax Press is at maximum workload or at rest.
The Forster Reloading Press has three times the mechanical advantage of an ordinary "C" press. Effortless, full length sizing can actually be accomplished by operating the handle of the press with the little finger! This press delivers perfect alignment of the die and the case because the shell holder jaws are designed to float with the die, thereby permitting the case to center precisely in the die. Dual floating guide rods to help ensure perfect alignment.
The unique top priming device seats primers to factory specifications. The seater is always at the correct angle to the case head. Primers will not flip or tip. They will be seated straight, level, and at a uniform distance below the case head. Primers cannot be crushed, nor will they protrude from the case head and cause premature firing. Includes large and small primer seaters.
Increase your access to the shell holder jaws and speed up your work flow with the
Curved Linkage upgrade.
Specifications and Features:
- Supplied with "S" Jaws
- Change dies in seconds
- Positive spent primer catch keeps working parts free of debris
- Dual floating guide rods ensure alignment
- Floating jaws deliver perfect aignment with floating die
- Ambidextrous handle for left or right handed reloaders
- Built in priming system
- Accepts standard 7/8x14 dies