• 
• 

DESCRIPTION

6mm B.R. Remington Type S Full Size Bushing Die
by REDDING RELOADING PRODUCTS

Full length resizing while maintaining exact control of the case neck is often desirable in one operation. The new Type S - Full Length Resizing/Bushing Die accomplishes this task with the precision you would expect from Redding.

Uses the same interchangeable bushings (.001" increments) as those used in our bushing style neck sizing dies.

The adjustable decapping rod allows you to adjust the bushing position, sizing only part of the neck length when desire d .

Concentricity is enhanced by the ability of the bushing to self-center on the neck of the cartridge case.

All Type S (except 17 and 20 Cal.) dies are supplied with both the standard size button and a decapping pin retainer for the advantages and versatility described under our Type S - Bushing Style Neck Sizing Dies.

By removing the bushing and all internal parts, the Type-S full bushing die may also be used as a body die.

Bushings not included. The easiest way to determine the proper diameter bushing is to measure the neck diameter of several loaded or dummy cartridges with an accurate micrometer. (These dummy cartridges can be loaded with your old set of dies or a borrowed set.) Then, simply subtract 0.001" from the cartridge that had the smallest average measurement. This will allow for a slight amount of spring back and create a proper press fit for the bullet.

*Please note* All defective returns must be made through Redding directly. You can visit their website by Clicking Here or call them at (607) 753-3331.

• REVIEWS
• DELIVERY INFO
• SPECIAL OFFERS
• MANUFACTURER INFO