DESCRIPTION
6mm Dasher Custom Type S Neck Bushing 3 Die Set
by REDDING RELOADING PRODUCTS
Product Overview
Midsouth now offers the 6mm Dasher Custom Type S Neck Bushing 3 Die Set. Redding uses only top of the line steel alloy to machine their dies. The Redding 6mm Dasher Type S Neck Sizing Die is guaranteed to return your brass to SAAMI standards. The Neck Sizing Dies are heat treated to ensure a perfect sizing every time on all quality brass. The 6mm Dasher dies have a neck expander and decapping rod built right in to perform all the steps to prep your cases for primer, powder and a bullet. These Neck Sizer dies use precision ground bushings that come in increments of .001 to ensure you are getting 100% of the possible performance from you brass and your cartridges. The 3 Die Set also includes a Body Die that will full length resize the cases, even if they have become difficult to work. A Regular Seating Die rounds out the set and can be used to seat all types of bullets and will crimp them perfectly each time.
*NOTE Bushings not included. The easiest way to determine the proper bushing size for your cartridge is to measure the neck diameter of several loaded or dummy rounds. (These dummy cartridges can be loaded with your old set of dies or a borrowed set.) Then, simply subtract 0.001" from the cartridge that had the smallest average measurement. This will allow for a slight amount of spring back and create a proper press fit for the bullet.
Specifications and Features:
- High Quality, Heat Treated Steel
- Precision Machined to exact SAAMI Standard
- Neck Expander and Decapping Rod Built in
- Bushings are sold in .001" Increments
- Body Die for Full Length Sizing
- Standard Seating Die to Seat Bullets and Crimp
- Lifetime Warranty from Redding
*Please note* All defective returns must be made through Redding directly. You can visit their website by
Clicking Here or call them at (607) 753-3331.