• 
• 

DESCRIPTION

M&P Polymer Forward Set Sear and Trigger Kit
by Apex Tactical

Midsouth carries the M&P Polymer Forward Set Sear and Trigger Kit from Apex Tactical. The M&P Polymer Forward Set Sear and Trigger Kit eatures a solid polymer trigger body, with center pivoting safety. This kit will set the trigger break point farther forward than the factory trigger assembly as well as, significantly reduce the uptake and over travel. It produces a trigger pull very similar to that of a 1911 but in a polymer frame striker-fired pistol. The Polymer Forward Set Sear & Trigger Kit boasts a smooth trigger pull throughout the break. The rounded trigger face provides the user with a comfortable surface for the firing finger. The kit comes with two (2) trigger return springs; one designed to produce approximately a 4.0 lbs trigger pull (silver spring), and one to produce a 5.0 lbs trigger pull (green spring). These two options give the end user the ability to customize their trigger pull for their specific needs.

Specifications and Features:

• Works with all Smith & Wesson M&P Pistols (excluding M&P M2.0) in all centerfire calibers and configurations.
• Does NOT function in the M&P M2.0, M&P Shield, BodyGuard, 22 or 22 Compact pistols.
• Requires the use of the sear housing block designed for the large size sear plunger and spring.
• Lowers trigger weight to approximately 4.0 lbs (silver spring) and 5.0 lbs (green spring)
• Smooth uptake and reset
• Center mounted pivoting safety maintains factory safety values
• Easy to install
• Reduced trigger pre-travel and over travel to produce a feel similar to a single action fire control system
• Overall reduction in trigger travel is approximately 50%
• A smooth trigger pull all the way through to the break
• Reduced reset

Comes with:

• Polymer Forward Set Trigger
• Forward Set Sear
• Ultimate Striker Block Kit (Striker Block, Spring and Talon Tactical Tool)
• Forward Set Spring Kit (Silver 4.0lb Trigger Return Spring, Green 5.0lb Trigger Return Spring, Polymer Slave Pin, Sear Spring and Blue RAM Spring)

Note:This particular product usually requires a slight modification to the trigger bar loop for proper function. This kit REQUIRES the use of the larger 1/8 inch sear spring and plunger set up. If your M&P has a 1/16th inch diameter sear plunger and spring, we strongly advise you upgrade to a new style sear housing block before installing this product. All function and reliability testing was done with a 1/8 inch sear plunger and spring, therefore we cannot guarantee proper function without the appropriate size sear plunger and spring.

• REVIEWS
• DELIVERY INFO
• SPECIAL OFFERS
• MANUFACTURER INFO