• 
• 

DESCRIPTION

M&P Duty Carry Action Enhancement Kit
by Apex Tactical

Midsouth carries the M&P Duty Carry Action Enhancement Kit from Apex Tactical. The M&P Duty Carry Action Enhancement Kit is engineered to provide the M&P (9mm, .357Sig & .40S&W only) pistol owner a smooth, consistent 5.0 to 5.5 lbs. trigger pull with the advantages of shorter over-travel and shortened trigger reset. All of the components work together to provide a pull weight within the acceptable range for a top end, service pistol. The kit itself is designed to be drop-in and should not require further gunsmithing, however, armorer or gunsmith installation is recommended.

Specifications and Features:

• Works with all Smith and Wesson M&P Full Size, Compact, Long Slide and Pro Models, with or without thumb safeties and magazine disconnects.
• Works in conjunction with the Apex Action Enhancement Polymer or Aluminum Trigger or as a stand-alone.
• Does NOT function in the M&P 45 , M&P M2.0, or M&P Shield
• Reduces over-travel
• Smooths trigger pull
• Keeps pistol at a safe 5-5.5 lb trigger pull weight for Duty/Carry applications

Comes with:

• Fully Machined Sear
• Duty Carry Spring Set (Trigger Return Spring, 1/8" Sear Spring*)
• Ultimate Striker Block Kit (Striker Block, Spring and Talon Tactical Tool)
• Slave pin

Note:You may need to make an adjustment to the trigger bar loop for proper function. This kit REQUIRES the use of the larger 1/8 inch sear spring and plunger set up. If your M&P has a 1/16th inch diameter sear plunger and spring, we strongly advise you upgrade to a new style sear housing block before installing this product. All function and reliability testing was done with a 1/8 inch sear plunger and spring, therefore we cannot guarantee proper function without the appropriate size sear plunger and spring.

• REVIEWS
• DELIVERY INFO
• SPECIAL OFFERS
• MANUFACTURER INFO