DESCRIPTION
Fix It Sticks Scope Jack
by FIX IT STICKS
Product Overview:
The Fix It Sticks Scope Jack is a new way to quickly and easily level your scope to your NATO or Picatinny rail. Just mount the scope jack to the rail under your scope and turn the drive handle until the lifting arm engages with the flat section under your turrets. Once the scope is level, maintain pressure while tightening your ring screws to keep optic level throughout the process. In cases of minimal clearance, it may be necessary to remove the thumb screw and clamp, then slide the Scope Jack onto the rail from the side and reassemble.
Additional Notes:
- Works with any 1/4 Inch driver
- Requires scope with a flat section under turrets
- Needs a minimum of 1/4 Inch clearance between NATO/Pic rail and scope
- NATO/Pic rail must be accessible under optic
- Will NOT work with one piece mounts