DESCRIPTION
ARCALOCK 14 Inch Universal Barricade Rail
by AREA 419
Product Overview:
Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction. If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure.
Specifications And Features:
- Universal rail design is the same footprint as our previous rail. (There were two revisions to the hole spacing, if you have a very early model your hole spacing may change)
- Serrations are not sharp, will not damage bags or your hands
- Rail is backwards compatible with standard Arca accessories, but will not be locking without our clamp
- 65 Locking positions available on the 14" rail
- Made to the RRS 1.5" Dovetail Standard, so you can be sure lever clamps will work
- No sharp edges. Every corner is radiused, and every edge is chamfered on the machine
- While designed with Manners Composite Stocks in mind, this rail accommodates a multitude of rifle and stock configurations that have an accessible front action screw and some sort of front attachment point(s).
- Type 3 Hard Coat anodized for additional durability
- Made in-house here in the USA from USA sourced 6061-T6 Aluminum
- Rail comes with 1 long Remington 700-style action screw to fit the rail to the front action screw attachment point. Some trimming will likely be required
- A 3/4" paddle bit and drill press may be required for installation of tee-nuts, depending on current rifle configuration. Tee nuts and hardware included.