DESCRIPTION
Hellfire Match Muzzle Brake 6.5mm 5/8-24 Raw Stainless
by AREA 419
Product Overview:
The Area 419 Hellfire Match Muzzle Brake - Softer, Flatter, No Extra Blast. With the original, and best-selling Hellfire release in 2016, Area 419 packed everything they knew about making a good muzzle brake into one design. Years later, they went back to the drawing board with a deeper understanding of what a brake can and should do, and how it can make a rifle as manageable as possible as the bullet exits your barrel.
This 4-port design isn’t simply stacking more of the same design on the end - It’s a complete redesign with each port being different. Different length ports, different angle ports, and different height port optimizes each one to provide an ideal function based on the pressure and volume of gas being acted on at its position. This results in optimal recoil management, optimal muzzle rise control, and imparts no extra sound pressure at the shooter position.
Using our patented Hellfire Self-Timing system, this brake uses the same Hellfire Universal Adapters that have been in our lineup for years, and can integrate with your Suppressor Mounts, Hellfire, Hellfire 2P and Linear Flash Suppressor.
Caliber Selection:
In order to simplify the choices, Area 419 has four caliber selections available for the Hellfire Match Muzzle Brakes. The difference in efficiency between using a caliber specific brake bore, and the next size up is so minimal, if not non existent, that Area 419 decided to simplify things in order to lower overall costs to you, the consumer.
- 223/6mm - Good for any bullet caliber up to and including 0.243 (6mm), 223, 5.56 NATO, 204, 17 caliber, etc.
- 6.5mm - Good for any bullet caliber up to and including 0.264 (6.5mm), ie 257, (Magnums OK)
- 7mm/308 - Good for any bullet caliber up to and including 0.308, ie 7mm, 284, 270, (Magnums OK)
- 338 - Good for any bullet caliber up to and including 0.338, ie 338WM, 338LM, 338NM, 338 Edge.
Specifications And Features:
- Rearward facing ports for the ideal balance of Recoil Reduction and Shooter Comfort
- Proprietary port design controls muzzle rise without the use of top porting
- Brake is engraved with caliber to indicate the top for correct orientation, and a horizontal line to aid in leveling
- Made from heat treated 17-4PH Stainless Steel
- Weighs 0.6 Pounds