DESCRIPTION
Bullet Seating Micrometer #7 Standard (243 Win/25-06 Rem/7x57/7mm
by REDDING RELOADING PRODUCTS
*NOTE*< The Bullet Seating Micrometer will NOT work with Redding Competition Seating Dies
Product Overview
Midsouth offers the Redding Bullet Seating Micrometer #7. This is a REPLACEMENT Seating Micrometer for use in standard Redding Dies with a 1/2-20TPI thread for the seating stem. You will replace your seating stem with this Bullet Seating Micrometer stem to have the most precise seating adjustment available from Redding. The Bullet Seating Micrometer #7 will allow you to achieve a higher degree of accuracy in your favorite cartridges by controlling the exact depth of the bullet in the case. The Bullet Seating Micrometer #7 will work for the cartridges listed below :
- 243 WSSM
- 243 Winchester
- 25 WSSM
- 25-06 Remington
- 260 Remington
- 270 WSM
- 7mm-08 Remington
- 7mm Remington Mag
- 7mm x 57 Mauser
- 280 Remington (7mm Exp. Rem.)
- 6mm B.R. Rem (Norma BR)
- 6mm P.P.C. USA
- 250 Savage (250-3000)
- 6.5mm/284 Win (Norma)
- 6.8mm Remington SPC
- 7mm B.R. Remington
- 7mm WSM
- 7mm Remington Ultra Mag
- 284 Winchester
- 7.62mm x 39
- 240 Weatherby Mag
- 243 Winchester Improved 40 Degree
- 6.5-06 (A-Square)
- 280 Ackley Improved
- 7mm TCU
- 7-30 Waters
- 7mm Weatherby Mag
- 6mm/22-250 Remington
- 6mmXC
- 25-35 Winchester
- 25 Remington
- 250 Savage Improved 40 Degree
- 25/284 Winchester
- 25-06 Remington Improved 40 Degree
- 260 Remington Improved 40 Degree
- 6.5 GRENDEL
- 6.5 Creedmoor
- 6.5mm x 50 Japanese
- 6.5mm x 57 Mauser
- 6.5mm Remington Mag
- 7mm-08 Rem. Improved 40 Degree
- 7mm x 57 Improved 40 Degree
- 7mm/300 Weatherby Mag
*Please note* All defective returns must be made through Redding directly. You can visit their website by Clicking Here or call them at (607) 753-3331